Freud 68-100 1/4″ (Dia.) Flush & Bevel Trim Bit

1/4″ (Dia.) Flush & Bevel Trim BitFrom the ManufacturerFreud’s solid carbide flush and bevel trim bits are used with an edge guide to trim plastic laminates either flush or at a 7 degree bevel to eliminate filing. Covered by Freud’s limited lifetime warranty.

• Angle 7 , Minor Height 11/64″, Number of Cutters 2, Overall Dia. 1/4″, Overall Length 1-1/2″, Shank Dia. 1/4″, Carbide Height 3/8″
• Rout either flush or bevel edges on plastic laminates
• The 41-402 includes two bearings that interchange for flush and bevel applications
• Use in hand-held or table-mounted routers or laminate trimmers
• Edge guiding system required for items 41-300 and 68-100
• Bit #68-100 is Freud Premier Solid Carbide

[‘Small’, ‘Yes Coupons’]